Akuvox - Support Articles

How to add devices for live monitoring through the web interface

To add devices to your Monitor list, go to Phone -> Monitor on a web browser Your interface should look similar to the one below: Fill in the fields for “Door Phone” and then select “Add” when finished:Sip Account: This field is optional, it can be the SIP extension or IP address of your device,or a different device. This field can customize the preview video while ringing.Device Name: A name for your deviceDestination URL: This is the RTSP address of the device you want to monitorCommon formats can be found belowUser Name: The username of the device you want to monitorPassword: The password of the device you want to monitor  For compatibility, it is best to use a stream with a max resolution of 1280x720. Common RTSP addresses to fill in for Destination URL: Akuvox Door Stations – rtsp:// [IP ADDRESS]DoorBird Door Stations – rtsp:// [IP ADDRESS] /mpeg/media.amp Hikvision Recorders and IP Cameras – rtsp:// [ADDRESS] : [RTSP PORT] /Streaming/Channels/ [CH] 02Example – rtsp://192.168.1.88:9090/Streaming/Channels/1402Dahua Recorders and IP Cameras – rtsp:// [ADDRESS] : [RTSP PORT] /cam/realmonitor?channel= [CH] &subtype=1Example – rtsp://192.168.1.88:9090/cam/realmonitor?channel=14&subtype=1Uniview NVR – rtsp:// [ADDRESS] : [RTSP PORT] /unicast/c [CH] /s1/liveExample – rtsp://192.168.1.88:9090/unicast/c14/s1/liveUniview IP Cameras – rtsp:// [ADDRESS] : [RTSP PORT] /media/video2Example – rtsp://192.168.1.88:9090/media/video2   You can also use our address generator below if to get the correct Destination URL for our surveillance recorders and ip cameras. It is recommended to use the substream format for monitoring purposes Fill in your information as follows: [ADDRESS] – This can be the IP address or the domain / DDNS name of your device [RTSP PORT] – This is the RTSP port of your device, the default is normally 554 or 9090 [CH] – This refers to the channel number that you want to pull