OR-705CP PoE over 2-Wire Extender Kit
Factory-paired PoE + IP extender kit for 2-wire / twisted-pair runs - Ethernet and power to a camera over one existing pair.
Key Features
- Two-unit kit: transmitter (camera end) + receiver (switch end), paired at the factory - the pairing code is printed on both labels
- Line side uses a 2-pin screw terminal - works over ordinary 2-conductor / twisted-pair wire, no BNC needed
- Receiver takes DC 44-56 V (β₯1 A) on a barrel jack and has an RJ45 to the switch or NVR
- Transmitter delivers RJ45 Ethernet plus a DC OUT screw terminal to the camera end
- Very low self-consumption - under 2 W per the label
- Compact metal housing with screw-mount ears - about 3 x 2.5 x 1 in
- Status LEDs on the receiver: PLC (line), LAN, PWR
Real Measurements
Measured by hand on the actual units.
Specifications
| Model | OR-705CP (2-wire / twisted-pair version) |
| Kit contents | 1 x transmitter (Tx, camera end) + 1 x receiver (Rx, switch end), factory paired |
| Line connection | 2-pin screw terminal ("PLC") on each unit |
| Receiver (switch end) | DC IN barrel jack, RJ45 LAN, LEDs: PLC / LAN / PWR |
| Transmitter (camera end) | RJ45 LAN + DC OUT 2-pin screw terminal |
| Power input (receiver) | DC 44-56 V, β₯1 A |
| Self-consumption | Under 2 W |
| Housing | Metal, screw-mount ears |
| Size (measured) | About 3" W x 2.5" D x 1" H body; about 3.6" across the mounting ears |
| Also available | OR-705AP - same kit with BNC coax line connectors instead of 2-pin terminals |
| Made by | Shenzhen Gaode Technology Co., Ltd. (ε₯₯ζε―) |