Uniview - Support Articles

How to configure Face Recognition

Preparation Uniview's Facial Recogition / Monitoring feature can only be used with a Smart Bar and EPB recorderDownload both firmware for your recorder and latest recognition firmware for your smart bar here : https://securitysystemdepot.com/pages/support-uniview-firmwareUpgrade your NVR and your smart bar through your NVR's maintenance interface Step 1 - Enable monitoring on your recorder To enable monitoring, go to Smart -> Monitoring -> Add Monitoring Task on your browser Step 2 - Select a camera to monitor While adding a monioting task, enable, adjust the sensitivity to your needs, and save Step 3 - Enable recogniton on your camera 3a - Go to Setup -> VCA -> Face Detection3b - Select your camera, and enable both Face Recognition and Face Shot3c - Change your Recognition Mode to NVR Recognition3d - Select either Full Screen as a detection area, or specify your own area right below it3e - Adjust your sensitivity and save Step 4 - Setting up the faces to recognize Perform these steps after giving your recorder time to accumulate faces to its' database Step 5 - How to search for a matching face